Videos

Maker Portraits

Archäologie trifft 3D Scan-Technologie

Museum of Research Schöningen: Archeology meets 3D Scan-Technology

300.000 years of history are archived at the Museum of Research in Schöningen. 3D metrology solutions help to collect detailed information about the findings. Whether the reconstruction of parts or precise surface inspection: Thus the GOM Scan 1 and the software solution allow an insight into the past, which is accessible to everyone. Learn more about the Museum: https://forschungsmuseum-schoeningen.de/home

Neueste Videos

How to

How to scan large parts using ZEISS T-SCAN hawk 2

How to

How to scan large parts using ZEISS T-SCAN hawk 2

Looking for an easy and intuitive way to 3d scan large parts up to multiple meter? Then the 3D laser scanner ZEISS T-SCAN hawk 2 with the new satellite mode is the right solution for you. Let Matthias show you how it’s done.
Do you have any questions about ZEISS T-SCAN hawk 2? Contact us via support@HandsOnMetrology.com

Expand Video

Next Episodes

How to

How to scan large parts using ZEISS T-SCAN hawk 2

How to

HSB: Maintenance of historic steam locomotives

Maker Portraits

HSB: Maintenance of historic steam locomotives

Maker Portraits

HSB: Maintenance of historic steam locomotives

HSB is the largest service provider for public transportation in eastern Germany. They use the state-of-the-art 3D scanning technology of the ZEISS T-SCAN hawk 2 to ensure that their steam locomotives run non-stop and that their traditional drives are preserved for the future. Accurate 3D models of the machines support the maintenance, repair and overhaul – keeping a part of German history alive in the Harz mountains.

Want to learn more about HSB? Visit https://www.hsb-wr.de/startseite/

Expand Video

Next Episodes

Maker Portraits

How to scan large parts using ZEISS T-SCAN hawk 2

Maker Portraits

HSB: Maintenance of historic steam locomotives

One-Minute Insight

Data import from 3rd party scanners

One-Minute Insight

Data import from 3rd party scanners

Working with different types of scanners? Well, you only need one software to evaluate your data. In this video, Kai shows you how easy it is to import point cloud data into ZEISS INSPECT, to create a mesh and to start your inspection. All functions shown are available in the current software version. Have you got any questions about ZEISS INSPECT? Then contact us via email: support@HandsOnMetrology.com

Expand Video

Next Episodes

One-Minute Insight

How to scan large parts using ZEISS T-SCAN hawk 2

One-Minute Insight

HSB: Maintenance of historic steam locomotives

Maker Portraits
One-Minute Insights
GOM Scan 1
T-SCAN hawk 2
ATOS Q
METROTOM 1
Software

Beliebteste Videos

One-Minute Insight

How to use ZEISS INSPECT as a presentation viewer

One-Minute Insight

How to use ZEISS INSPECT as a presentation viewer

Get an insight from Jonas and learn why he prefers to use ZEISS INSPECT as a viewer whenever he has to present the results of an inspection job to a client or the team.

All functions shown are available in the current software version.

Have you got any questions about ZEISS INSPECT ? Then contact us via email: support@HandsOnMetrology.com

Expand Video

Next Episodes

One-Minute Insight

How to use ZEISS INSPECT as a presentation viewer

One-Minute Insight

How to 3D scanning for wear control in MRO

How to

How to 3D scanning for wear control in MRO

How to

How to 3D scanning for wear control in MRO

Wear and tear of production equipment causes malfunctioning, delays, downtime. In this How to, Roel shows you how 3D scanning is used to implement predictive maintenance – and therefore keep production running efficiently.

Got any questions on 3D scanning? Contact us via support@HandsOnMetrology.com

Expand Video

Next Episodes

How to

How to use ZEISS INSPECT as a presentation viewer

How to

How to 3D scanning for wear control in MRO

Getting Started – Next Steps

T-SCAN hawk 2: The new Satellite mode

Getting Started – Next Steps

T-SCAN hawk 2: The new Satellite mode

In this Getting Started we demonstrate how to accurately scan large parts with photogrammetry. The new integrated satellite mode ensures precise pre-referencing. No other features, like coded markers, are necessary. Watch the video to see the T-SCAN hawk 2 unleash its full potential.
Do you want to find out more about the portable 3D laser scanner T-SCAN hawk 2? Visit HandsOnMetrology.com/sessions

Expand Video

Next Episodes

Getting Started – Next Steps

How to use ZEISS INSPECT as a presentation viewer

Getting Started – Next Steps

How to 3D scanning for wear control in MRO

Getting Started – Basics

T-SCAN hawk 2: The setup

Getting Started – Basics

T-SCAN hawk 2: The setup

Want to know what to consider when setting up your new T-SCAN hawk 2? Let Aysel show you an easy step-by-step guide for starting your laptop as well as the system. Get ready for your first scan with the T-SCAN hawk 2! Have you got any questions about 3D scanning? Contact us via support@HandsOnMetrology.com

Expand Video

Next Episodes

Getting Started – Basics

How to use ZEISS INSPECT as a presentation viewer

Getting Started – Basics

How to 3D scanning for wear control in MRO

How to

How to use a 3D scanner in confined spaces

How to

How to use a 3D scanner in confined spaces

In this How to Roel is scanning complex and hard to reach areas of a van interior. Whether for inspection or design purposes – the ZEISS T-SCAN hawk 2 is the perfect fit for extracting accurate and complete dimensions in confined spaces. Got any questions on 3D scanning? Contact us via support@HandsOnMetrology.com

Expand Video

Next Episodes

How to

How to use ZEISS INSPECT as a presentation viewer

How to

How to 3D scanning for wear control in MRO

Maker Portraits

Museum of Research Schöningen: Archeology meets 3D Scan-Technology

Maker Portraits

Museum of Research Schöningen: Archeology meets 3D Scan-Technology

Expand Video

Next Episodes

Maker Portraits

How to use ZEISS INSPECT as a presentation viewer

Maker Portraits

How to 3D scanning for wear control in MRO

One-Minute Insight

Cutting objects into pieces with Delete by Plane

One-Minute Insight

Cutting objects into pieces with Delete by Plane

Do you want to print a piece of art that is bigger than the volume of your 3D printer? Jurgen from Tetra Vision shows you an easy way to do just that, using the Delety by Plane function in ZEISS INSPECT.
All functions shown are available in the current software version

Have you got any questions about ZEISS INSPECT? Then contact us via email: support@HandsOnMetrology.com

Expand Video

Next Episodes

One-Minute Insight

How to use ZEISS INSPECT as a presentation viewer

One-Minute Insight

How to 3D scanning for wear control in MRO

Getting Started – Next Steps

ZEISS REVERSE ENGINEERING: Tips and tricks

Getting Started – Next Steps

ZEISS REVERSE ENGINEERING: Tips and tricks

In this video, Josh lets you in on some handy tips and tricks to help you get started even faster with ZEISS REVERSE ENGINEERING. Learn how to bookmark your favorite functions. Discover how the transparency tool can help you get a better look at specific elements. Learn about how the snapshot tool makes it easy for you to create images for reports. Start using the „fit to screen“ icon to get a better view of your part. And minimize clicks by looking at the shortcut list in the user guide.
All functions shown are available in the current software version.

Got any questions on the ZEISS software? Contact us via support@HandsOnMetrology.com

Expand Video

Next Episodes

Getting Started – Next Steps

How to use ZEISS INSPECT as a presentation viewer

Getting Started – Next Steps

How to 3D scanning for wear control in MRO

gom-scan1_3d-inspection_scan&reprint-broken-parts

How to

Wie du deine eigenen Ersatzteile scannst & druckst

How to

Wie du deine eigenen Ersatzteile scannst & druckst

Mit 3D-Scannern und 3D-Druckern lassen sich Ersatzteile ganz einfach beschaffen. Schritt 1: Scanne das kaputte Teil mit dem GOM Scan 1. Schritt 2: Repariere das Teil mit GOM Inspect – und erstelle eine Arbeitsdatei für deinen 3D-Drucker. Alles in etwa zwei Minuten!

Expand Video

Next Episodes

How to

How to use ZEISS INSPECT as a presentation viewer

How to

How to 3D scanning for wear control in MRO

gom_atos-q_3d-inspection_3d-scan-without-reference-points

How to

Wie man Objekte ohne Referenzpunkte scannt

How to

Wie man Objekte ohne Referenzpunkte scannt

Wie scannt man ein Objekt, wenn Referenzpunkte nicht erlaubt oder erwünscht sind? Norman zeigt: Mit dem vielseitigen ATOS Q sind keine Referenzpunkte nötig, da GOM Inspect einfach die Objektposition durch beste Passung berechnet – wenn es genug Oberflächendaten gibt.

Expand Video

Next Episodes

How to

How to use ZEISS INSPECT as a presentation viewer

How to

How to 3D scanning for wear control in MRO

1/10

Maker Portraits

HSB: Maintenance of historic steam locomotives

Maker Portraits

HSB: Maintenance of historic steam locomotives

Want to learn more about HSB? Visit https://www.hsb-wr.de/startseite/

Maker Portraits

Ossiform: Quality control of 3D printed bone implants

Maker Portraits

Ossiform: Quality control of 3D printed bone implants

Ossiform is the developer of a novel 3D bone printing solution that enables the creation of resorbable patient specific implants. For this stunning additive manufacturing process, 3D scanning is crucial for quality control. They chose the GOM Scan 1 to have a fast method to validate their production and to gain high accuracy of their measuring results. Not to mention easy clean room setup.

Want to learn more about Ossiform and their commitment to innovation and high quality medical devices? Visit https://ossiform.com/

Maker Portraits

Huck Cycles: Quality control of electric motorcycles

Maker Portraits

Huck Cycles: Quality control of electric motorcycles

At Huck Cycles it’s all about developing and designing electric motorcycles. The hand-held ZEISS T-SCAN hawk 2 comes into use when exact and fast quality control is needed. With the scanner, controlling each and every single component via a quick scan and CAD comparison is possible – saving the company time and energy, while maintaining high quality motorized vehicles.
Want to learn more about Huck Cycles? Visit www.huckcycles.com

Maker Portraits

Stork: MRO with portable 3D scanner

Maker Portraits

Stork: MRO with portable 3D scanner

MRO processes with the portable ZEISS T-SCAN hawk 2 are the way to go for the company Stork.The flexibility of the scanner is ideal for the indiviudal quality control and reverse engineering tasks of their customers. Have a look at the daily work at Stork company in our new Maker Story.

Maker Portraits

Museum of Research Schöningen: Archeology meets 3D Scan-Technology

Maker Portraits

Museum of Research Schöningen: Archeology meets 3D Scan-Technology

Maker Portraits

Precupa: Looking to a more sustainable future

Maker Portraits

Precupa: Looking to a more sustainable future

Operating for over 40 years at the foot of the Alps, Bavarian firm Precupa builds injection molds for the plastic industry. Together with his team, managing director Thomas März is constantly looking for ways to incorporate innovative and sustainable new technologies, such as Zeiss Reverse Engineering, into Precupa’s workflow. Our Maker Portraits are behind-the-scenes looks at some of the most exciting manufacturing, maintenance and repair service workshops.

Want to learn more about Precupa? Visit www.precupa.de

Maker Portraits

Fraunhofer IWU: Unique solutions for unique tasks

Maker Portraits

Fraunhofer IWU: Unique solutions for unique tasks

At the Fraunhofer Intitute for Machine Tolls and Forming Technology, there is no „normal business“. Instead, it’s all about unique clients with unique tasks seeking unique solutions. Whether it’s in the automotive, medical or robotics industry: 3D scanning makes it possible to step into the future – every day.
More information about our handheld systems, go to Getting Started T-SCAN hawk 2.

Maker Portraits

Atka: The plastics specialists

Maker Portraits

Atka: The plastics specialists

At Atka, it’s all about plastics. And about machines that attach non-manipulable plastic caps to beer kegs and are delivered to breweries all over the world. 3D scanning enables this family-run business to stay ahead of the game at all times.

Maker Portraits

Bereit für die Rennstrecke: Rallye mit BMA Autosport

Maker Portraits

Bereit für die Rennstrecke: Rallye mit BMA Autosport

Triff Martin von BMA Autosport in Belgien. Seine Werkstatt baut Straßenwagen in moderne Rallyeautos und historische Rennwagen um. Nach dem Rückbau bis auf die Rohkarosserie macht das BMA-Team aus dem Auto mit 3D-Modellen einen heißen Schlitten. Erfahre mehr im Video. Unsere Maker Portraits werfen einen Blick hinter die Kulissen von spannenden Unternehmen aus den Bereichen Fertigung, Wartung und Reparatur. Mehr über BMA Autosport findest du hier: www.bma-autosport.com

Maker Portraits

fischer group: Stahlrohre jenseits des Standards

Maker Portraits

fischer group: Stahlrohre jenseits des Standards

Die fischer group ist ein globaler Lieferant von Edelstahlrohren. Atme den Metallgeruch in den Hallen ein und schau dir an, wie 3D-Scans ein wichtiger Teil ihrer Arbeit sind – vom Erkennen von Abweichungen bis zur Auswertung und der Entwicklung von Innovationen. Unsere Maker Portraits werfen einen Blick hinter die Kulissen von spannenden Unternehmen aus den Bereichen Fertigung, Wartung und Reparatur. Mehr über die fischer group findest du hier: www.fischer-group.com

Maker Portraits

Stahlotec: Retrofit für Stahlkolosse

Maker Portraits

Stahlotec: Retrofit für Stahlkolosse

Sie arbeiten mit Stahl, Aluminium, Kupfer und sind dabei nicht dein typischer Handwerksbetrieb. Stahlotec ist offen für neue Ideen und rettet schwere Komponenten mit Verschleiß im Millimeterbereich vor dem Schrott: Ein Prozess, der nur mit 3D-Messtechnik möglich ist. Unsere Maker Portraits werfen einen Blick hinter die Kulissen von spannenden Unternehmen aus den Bereichen Fertigung, Wartung und Reparatur. Mehr über Stahlotec findest du hier: www.stahlotec.de

Maker Portraits

Formlabs: Mit 3D-Druck in die Zukunft

Maker Portraits

Formlabs: Mit 3D-Druck in die Zukunft

Das Leitbild: Jeder soll alles herstellen können. Dürfen wir vorstellen? Sebastian von Formlabs Berlin, Hersteller hochwertiger 3D-Drucker zu annehmbaren Preisen. In der Qualitätskontrolle führt kein Weg am 3D-Scanning vorbei. Das Ergebnis: schnelle, präzise Prototypen.

Maker Portraits

Cowboy: Vernetzte E-bikes für urbane Pendler

Maker Portraits

Cowboy: Vernetzte E-bikes für urbane Pendler

Dürfen wir vorstellen? Olivier vom E-Bike-Hersteller Cowboy in Brüssel. Ziel: urbane Mobilitätslösungen mit großartigem Design und einfacher Nutzung herzustellen – zu erschwinglichen Preisen. 3D-Scanning hilft ihm mit den nahtlosen Oberflächen und der komplexen Montage.

Maker Portraits

RLL Racing: Technology wins races

Maker Portraits

RLL Racing: Technology wins races

Take a look behind the scenes at Rahal Letterman Lanigan Racing as they are getting their cars ready between races at the IndyCar Series. 3D scanning helps the team to modify their cars‘ bodyparts in order to maximize downforce, minimize drag and improve performance.

More information about our handheld systems, go to Getting Started T-SCAN hawk 2.

Maker Portraits

HA Group: Die Zukunft der Gießerei

Maker Portraits

HA Group: Die Zukunft der Gießerei

Besuche das Kompetenzzentrum von Hüttenes-Albertus. Spezialisiert auf Gießereitechnik, ist es eine Plattform für den Test neuer Ideen und bietet einen kompletten Prototypenservice. Wachsenden Kundenanforderungen wird mit 3D-Scanning und 3D-Inspektion begegnet. Unsere Maker Portraits werfen einen Blick hinter die Kulissen von spannenden Unternehmen aus den Bereichen Fertigung, Wartung und Reparatur. Mehr über Hüttenes-Albertus findest du hier: www.ha-group.com

Maker Portraits

R.A.R. Antwerpen: Gut ist niemals gut genug

Maker Portraits

R.A.R. Antwerpen: Gut ist niemals gut genug

Willkommen bei Raymond's Aircraft Restoration. Hier restaurieren und warten Raymond und sein Sohn Tim alte Flugzeuge – mit großer Leidenschaft für ihr Handwerk und viel Liebe zu Qualität und Präzision. Unsere Maker Portraits werfen einen Blick hinter die Kulissen von spannenden Unternehmen aus den Bereichen Fertigung, Wartung und Reparatur. Mehr über Raymond's Aircraft Restauration findest du hier: www.rar.be

Maker Portraits

Energetic: Die Magie der Turbinen

Maker Portraits

Energetic: Die Magie der Turbinen

Lerne Johann von Energetic Machinery in Belgien kennen und seine Begeisterung für industrielle Turbinen. Die erfolgreiche Einführung von Reverse Engineering ermöglicht es dem Unternehmen, Kunden einen spannenden Komplettservice zu bieten. Sieh dir die Story an. Unsere Maker Portraits werfen einen Blick hinter die Kulissen von spannenden Unternehmen aus den Bereichen Fertigung, Wartung und Reparatur. Mehr über Energetic Machinery findest du hier: www.energeticmachinery.com

Maker Portraits

Fagus: Leisten für die internationale Schuhindustrie

Maker Portraits

Fagus: Leisten für die internationale Schuhindustrie

Im Fagus-Werk in Alfeld dreht sich seit 1911 alles um den Schuhleisten: das Kernstück in der Schuhproduktion. Andreas Koch scannt und vermisst die Holz-Leisten für die Weiterverarbeitung. Das Endresultat: grüne Kunststoffleisten, so wie ihn der Schuhhersteller benötigt.

Maker Portraits

MMG: Meet the world’s largest ship propellers

Maker Portraits

MMG: Meet the world’s largest ship propellers

Meet MMG and their impressive ship propellers. Although huge, the parts are planned to the detail before months of development culminate in about ten minutes of casting time. To ensure quality and functionality, 3D measurement plays an import role in the process. Be ready for a big story.

Our Maker Portraits are behind-the-scenes looks at some of the most exciting manufacturing, maintenance and repair service workshops. Do you want to learn more about MMG? Visit www.xxl-metalworking.com

Maker Portraits

SST Flugtechnik: Flugzeugdesign made in Germany

Maker Portraits

SST Flugtechnik: Flugzeugdesign made in Germany

In China arbeitet Wan Hao für die deutsche Flugzeugkonstruktionsfirma SST Flugtechnik. Qualität steht für ihn über allem. Er denkt an alles, was ein Kunde wünschen könnte – noch vor der ersten Präsentation. Möglich macht das 3D-Messtechnik – dies ist seine Geschichte. Unsere Maker Portraits werfen einen Blick hinter die Kulissen von spannenden Unternehmen aus den Bereichen Fertigung, Wartung und Reparatur. Mehr über SST Flugtechnik findest du hier: www.sst-flugtechnik.com

1/20

One-Minute Insight

One 3D scan is all you need for precision

One-Minute Insight

One 3D scan is all you need for precision

You’re new to 3D scanning? You think that scanning across the same area several times igenerates better data? It’s a typical scanning rookie misconception, says Marco, and one that can be easily avoided. One scan is all you need for perfect results.

Have you got any questions about 3D scanning? Then contact us via email: support@HandsOnMetrology.com

One-Minute Insight

ZEISS INSPECT: Less mouse miles with a customized toolbar

One-Minute Insight

ZEISS INSPECT: Less mouse miles with a customized toolbar

Learn how to reduce your mouse mileage by customizing your toolbar. You want to use the software for reverse engineering? Daniel suggests adding Select Patch, Close Holes and Export STL to your bar – for a more intuitive, faster 3D scanning workflow.
All functions shown are available in the current software version.

Do you have any questions about ZEISS INSPECT? Contact us via email: support@HandsOnMetrology.com

One-Minute Insight

How to use ZEISS INSPECT as a presentation viewer

One-Minute Insight

How to use ZEISS INSPECT as a presentation viewer

Get an insight from Jonas and learn why he prefers to use ZEISS INSPECT as a viewer whenever he has to present the results of an inspection job to a client or the team.

All functions shown are available in the current software version.

Have you got any questions about ZEISS INSPECT ? Then contact us via email: support@HandsOnMetrology.com

One-Minute Insight

Cutting objects into pieces with Delete by Plane

One-Minute Insight

Cutting objects into pieces with Delete by Plane

Have you got any questions about ZEISS INSPECT? Then contact us via email: support@HandsOnMetrology.com

One-Minute Insight

Visualize 3D deviation using isolines

One-Minute Insight

Visualize 3D deviation using isolines

You want to see exactly which areas of a 3D scan are in and out of tolerance? Discover deviations at a glance – by doing a surface comparison and using your 3D scanner to project the isolines directly onto the part. Have you got any questions about 3D scanning? Then contact us via email: support@HandsOnMetrology.com

One-Minute Insight

Use the Clipping Cube function to get a perfect view

One-Minute Insight

Use the Clipping Cube function to get a perfect view

Need to look at a project with a lot of details and obstructed parts? Nanno shows you a trick to get a clear view of just the details you are interested in – by using the Clipping Cube function in ZEISS INSPECT. All functions shown are available in the current software version. Have you got any questions about ZEISS INSPECT? Then contact us via email: support@HandsOnMetrology.com

One-Minute Insight

Zeit sparen mit Quick GD&T

One-Minute Insight

Zeit sparen mit Quick GD&T

Erhalten Sie einen One Minute Insight von Christine, Carl Zeiss GOM Metrology Braunschweig. Sie zeigt Ihnen, wie Sie mit einem einzigen Klick auf „Quick GD&T“ viele Mauskilometer sparen können, um eine besonders schnelle Toleranzprüfung zu erhalten. Alle gezeigten Funktionen sind in der aktuellen Softwareversion verfügbar.

Haben Sie Fragen zu ZEISS INSPECT? Dann kontaktieren Sie uns per E-Mail: support@HandsOnMetrology.com

One-Minute Insight

Data import from 3rd party scanners

One-Minute Insight

Data import from 3rd party scanners

One-Minute Insight

3D scan like a pro without a rotation table

One-Minute Insight

3D scan like a pro without a rotation table

You’re starting out in 3D scanning and don’t have a rotation table (yet)? Don’t worry. Follow Daniel’s easy approach to scanning without one: Simply scan the part in eight steps, turning it by 45° between each scan.
All functions shown are available in the current software version.

Have you got any questions about 3D scanning? Then contact us via email: support@HandsOnMetrology.com

One-Minute Insight

Reduce mouse miles with the Smart Creation button

One-Minute Insight

Reduce mouse miles with the Smart Creation button

Some 3D inspection projects involve creating a lot of elements – and a lot of mouse miles. Avoid moving your mouse to „Create“ over and over again by using the Smart Creation button directly under your mouse pointer.
All functions shown are available in the current software version.

Have you got any questions about GOM Inspect? Then contact us via email: support@HandsOnMetrology.com

1/10

How To

Wie man große Objekte mit einem tragbaren 3D-Scanner scannt

Video ansehen

How does satellite mode work and why do you need it

Scanning larger parts can be challenging. We simplified the the process with the new satellite mode of the handheld laser scanner ZEISS T-SCAN hawk 2. It does without coded markers thus preparations are easy and fast. Learn more about the advanced way of photogrammetry here. Got any questions? Contact us via support@HandsOnMetrology.com.

GOM Scan 1

Getting Started – Basics

GOM Scan 1: Unboxing

Getting Started – Basics

GOM Scan 1: Unboxing

Watch Miles unbox the GOM Scan 1. What’s included: the sensor, a sensor cable, a power adapter and a measuring plate, a calibration object holder, a calibration panel and a useful accessories box. For those who travel a lot: a sturdy travel case is also available, with perfectly sized, padded compartments for all GOM Scan 1 elements, a tripod and an automatic rotation table.

Getting Started – Basics

GOM Scan 1: Das Setup

Getting Started – Basics

GOM Scan 1: Das Setup

In diesem Video zeigt dir Miles, wie einfach es ist, den neuen GOM Scan 1 einzurichten. Vom Anschließen und Einschalten des Sensors bis zum Einstecken des Lizenzschlüssels und Verbinden des motorisierten Drehtisches: Hier erfährst du Schritt für Schritt, was zu tun ist.

Getting Started – Basics

GOM Scan 1: Calibration

Getting Started – Basics

GOM Scan 1: Calibration

Calibrating your GOM Scan 1 is easy! Let Miles show you how it’s done. The GOM Scan 1 comes with all the accessories necessary for calibration – the software GOM Inspect guides you through the process and takes care of the rest. The best part: The sensor detects automatically, when it has to be recalibrated and informs you about it.

gom-scan1_3d-scanning_right-sensor-selection

Getting Started – Basics

GOM Scan 1: Die Wahl des richtigen Sensors

Getting Started – Basics

GOM Scan 1: Die Wahl des richtigen Sensors

Lerne von Miles, wie du mit dem GOM Scan 1 den richtigen Sensor für das perfekte Sichtfeld wählst: Der 400 MV Sensor ist für große Teile mit wenigen Details, 200 MW für kleinere Teile mit mehr Details und 100 MV für sehr kleine Teile mit hoher Detaildichte.

gom-scan1_3d-scanning_gom-inspect-software

Getting Started – Basics

GOM Scan 1: Deine erste Nutzung von ZEISS INSPECT

Getting Started – Basics

GOM Scan 1: Deine erste Nutzung von ZEISS INSPECT

In diesem Video begleitet dich Miles bei deiner ersten Nutzung von ZEISS INSPECT mit dem GOM Scan 1. Vom Startbildschirm aus kannst du ganz einfach zum richtigen Workspace navigieren. Wähle den "Digitize" Workspace aus, um sofort mit dem Scannen zu beginnen.

1/5

Getting Started – Next Steps

GOM Scan 1: Einführung in die Bauteilinspektion

Getting Started – Next Steps

GOM Scan 1: Einführung in die Bauteilinspektion

Miles gibt eine schnelle Einführung in die 3D Bauteilinspektion mit dem neuen GOM Scan 1. In diesem Video begleitet es dich durch jeden Schritt des Inspektionsvorgangs: vom Setup übers Scannen bis hin zum Reporting – freu dich auf einen schnellen, nahtlosen Workflow.

Getting Started – Next Steps

GOM Scan 1: Scanning Multiple Parts

Getting Started – Next Steps

GOM Scan 1: Scanning Multiple Parts

Let Miles show you how to scan multiple identical parts simultaneously using the GOM Scan 1 400 and the rotation table GOM Rot 350. Simply choose the workflow assistant for scanning multiple parts and follow the software as it guides you through the scanning process. Since the rotation table is marked with reference points, you can start scanning straight away. Partitioning the parts and aligning top and bottom scans is done with just a few clicks.

Getting Started – Next Steps

GOM Scan 1 für Reverse Engineering und 3D-Druck

Getting Started – Next Steps

GOM Scan 1 für Reverse Engineering und 3D-Druck

Verschaff dir einen schnellen Überblick über die Arbeitsabläufe im Reverse Engineering mit dem GOM Scan 1. Miles erklärt wichtige Aspekte, wie z.B. die Wahl des Sichtfelds, den Scanvorgang, Erstellung und Editieren von 3D-Netzen, Netz-Ausrichtung und Datenexport.

Getting Started – Next Steps

GOM Scan 1: Hochdetaillierte Teile scannen

Getting Started – Next Steps

GOM Scan 1: Hochdetaillierte Teile scannen

Entdecke, wie sich mit dem GOM Scan 1 hochdetaillierte Teile scannen lassen. Für kleine Teile, wähle den Sensor mit dem 100 mm Sichtfeld und montiere ihn auf einen Schreibtischständer. Das Ergebnis: ein 3D-Netz, das für 3D-Druck und Reverse Engineering geeignet ist.

Getting Started – Next Steps

GOM Scan 1: Oberseiten und Unterseiten scannen

Getting Started – Next Steps

GOM Scan 1: Oberseiten und Unterseiten scannen

In diesem Video zeigt dir Miles, wie man mit dem GOM Scan 1 und einem motorisierten Drehtisch die Oberseite und die Unterseite eines Bauteils scannt. Das Ergebnis: ein hochdetailliertes 3D-Netz und perfekter Digital Twin des Bauteils.

Getting Started – Next Steps

GOM Scan 1: Mit einem Drehtisch scannen

Getting Started – Next Steps

GOM Scan 1: Mit einem Drehtisch scannen

Capturing all sides of an object has never been easier. Let Miles show you how to measure a part from the top and from the bottom using a rotary table and the new GOM Scan 1. The result: a highly detailed mesh and perfect digital twin of the object you've scanned.

Getting Started – Next Steps

GOM Scan 1: Mit einer Messplatte scannen

Getting Started – Next Steps

GOM Scan 1: Mit einer Messplatte scannen

In Kombination mit einer manuellen Messplatte ist das 3D Scanning mit dem GOM Scan 1 noch einfacher. Der Abstandsradar hilft dir dabei, den richtigen Abstand zu finden. Egal, ob du mit oder ohne Referenzpunkte scanst – du erhältst ein präzises 3D-Netz.

1/7

How to

How to 3D scan different materials

How to

How to 3D scan different materials

3D scanning is applicable for a wide range of materials and surfaces. In this How To video, Jeppe shows what to consider when 3D scanning different materials. This will help you generate the best possible 3D data.

Got any questions on 3D scanning? Contact us via support@HandsOnMetrology.com

How to

How to 3D scan with the right distance to object

How to

How to 3D scan with the right distance to object

To receive highly precise data and to make the 3D scanning procedure fast and easy, the optimal distance to the objects is one important factor.

Let Jeppe show you how to detect the right distance and how our 3D scanning systems are supporting you here.

Got any questions on 3D scanning? Contact us via support@HandsOnMetrology.com

How to

How to find your perfect exposure time with ZEISS INSPECT

How to

How to find your perfect exposure time with ZEISS INSPECT

Let Norman show you how to find the perfect exposure time for your part. The live camera image in ZEISS INSPECT offers multiple options of automatic exposure times: automatic by matrix computes up to three different exposure times for the entire field of view – making it a good choice for parts that combine light and dark surfaces. Other options: automatic by spot, automatic for reference points and interactive. Take a pick and start scanning!

All functions shown are available in the current software version.

Got any questions on 3D scanning? Contact us via support@HandsOnMetrology.com

How to

Wie du deine eigenen Ersatzteile scannst & druckst

How to

Wie du deine eigenen Ersatzteile scannst & druckst

How to

Wie man eine 3D-Inspektion an einem 3D-Druck durchführt

How to

Wie man eine 3D-Inspektion an einem 3D-Druck durchführt

In diesem Video führt Cornelius mit dem neuen GOM Scan 1 eine 3D-Inspektion an einem frisch gedruckten 3D-Druck-Modell durch. Ist das Teil im Toleranzbereich der CAD-Referenzdatei? Die Ergebnisse helfen dem Team, eine neue Version der CAD-Datei zu generieren.

1/5

Getting Started – Basics

T-SCAN hawk 2: Unboxing your new 3D laser scanner

Getting Started – Basics

T-SCAN hawk 2: Unboxing your new 3D laser scanner

Get started with your T-SCAN hawk 2. In this first episode you get to unbox the new hand-held laser scanner together with Aysel. Whether the power cable, the calibration panel or reference points, we got you covered for easy, fast and precise 3D scanning. Have you got any questions about 3D scanning? Contact us via support@HandsOnMetrology.com

Getting Started – Basics

T-SCAN hawk 2: The setup

Getting Started – Basics

T-SCAN hawk 2: The setup

Getting Started – Basics

T-SCAN hawk 2: Your first use of ZEISS INSPECT

Getting Started – Basics

T-SCAN hawk 2: Your first use of ZEISS INSPECT

In our Getting Started we demonstrate how easy it is to start scanning with the T-SCAN hawk 2. Besides the calibration process, Aysel navigates you through the ZEISS INSPECT software and gives useful tips and tricks for your first scan.
All functions shown are available in the current software version.

Have you got any questions about 3D scanning? Contact us via support@HandsOnMetrology.com

1/3

Getting Started – Next Steps

T-SCAN hawk 2: Scanning in ZEISS INSPECT

Getting Started – Next Steps

T-SCAN hawk 2: Scanning in ZEISS INSPECT

Have a look at the remote workflow which guides you through different scanning task with ease. Aysel applies the common scanning strategy of scanning one side of the part only. The buttons on the backside of the scanner simplify the process, even when scanning deep pockets.
All functions shown are available in the current software version.

Got a question? Contact us via support@HandsOnMetrology.com

Getting Started – Next Steps

T-SCAN hawk 2: Scanning with reference points

Getting Started – Next Steps

T-SCAN hawk 2: Scanning with reference points

Have a look at how to easily scan both sides of your part using reference points. With just a push of a button on the T-SCAN hawk 2, the guided workflow assists in the scan. The software optimizes the polygonization of the final mesh. Have you got any questions about 3D scanning? Contact us via support@HandsOnMetrology.com

Getting Started – Next Steps

T-SCAN hawk 2: Scanning without reference points

Getting Started – Next Steps

T-SCAN hawk 2: Scanning without reference points

You are scanning a lot of 3D geometries? Then go ahead and try the scanning strategy Aysel presents in this Getting Started: Scanning without any reference points. Just select the right template in the software, define the background plane and start your 3D scan. Have you got any questions? Contact us via support@HandsOnMetrology.com

Getting Started – Next Steps

T-SCAN hawk 2: The new Satellite mode

Getting Started – Next Steps

T-SCAN hawk 2: The new Satellite mode

Getting Started – Next Steps

T-SCAN hawk 2: Scanning fine details

Getting Started – Next Steps

T-SCAN hawk 2: Scanning fine details

Whether you are scanning large parts with local details or a completely detailed part, T-SCAN hawk 2 is the right solution. Let Aysel explain you, how to operate the scanner and get useful tips and tricks for both cases. Have you got any questions? Contact us via support@HandsOnMetrology.com

Getting Started – Next Steps

T-SCAN hawk 2: Scanning deep pockets

Getting Started – Next Steps

T-SCAN hawk 2: Scanning deep pockets

Your challenge is to scan deep pockets of a part? The single laser line mode of the T-SCAN hawk 2 allows you to scan even deeper into wholes. Watch the Getting Started to learn more about the detailed scan of hard to reach areas. Have you got any questions on 3D scanning? Contact us via support@HandsOnMetrology.com

Getting Started – Next Steps

T-SCAN hawk 2: All features of the remote control buttons

Getting Started – Next Steps

T-SCAN hawk 2: All features of the remote control buttons

Let Aysel show you the different possibilities of the control buttons on the back of the T-SCAN hawk 2. It makes starting the remote workflow, zooming in and out, opening the menu and more as easy as a push of the button. Have you got any questions on 3D scanning? Contact us via support@HandsOnMetrology.com

Getting Started – Next Steps

T-SCAN hawk 2: Accessories

Getting Started – Next Steps

T-SCAN hawk 2: Accessories

You want to scan your parts without sticking reference points on it? We have the right accessory for you: the magnetic reference pillars. Placing them around the part ensures easy, intuitive and accurate data collection. Have you got any questions on 3D scanning? Contact us via support@HandsOnMetrology.com

Getting Started – Next Steps

T-SCAN hawk 2: Get some useful tips & tricks

Getting Started – Next Steps

T-SCAN hawk 2: Get some useful tips & tricks

Need more tricks on the new T-SCAN hawk 2? Aysel is going to reveal useful tips that make your scanning process even more successful. Get more information on topics, like exposure modes, scanner orientation, defining background planes and customizing workflows. Have you got any questions on 3D scanning? Contact us via support@HandsOnMetrology.com

1/9

How to

How to scan large parts using ZEISS T-SCAN hawk 2

How to

How to scan large parts using ZEISS T-SCAN hawk 2

How to

How to 3D scanning for fast and efficient incoming inspection in MRO

How to

How to 3D scanning for fast and efficient incoming inspection in MRO

Keeping equipment in good condition is necessary for an efficient production process. 3D scanning helps to capture all dimensions of parts for a fast inspection. Roel shows you how reparation or modification of equipment can be done using hand-held solutions. Got any questions on 3D scanning? Contact us via support@HandsOnMetrology.com

How to

How to perform fast inspection in electric motorcycle assembly

How to

How to perform fast inspection in electric motorcycle assembly

Components with different tolerances, make building safe motorcycles a challenge. Let Alex show you how easy it can be to inspect single motorcycle components and the digital assembly with ZEISS T-SCAN hawk 2 and the inspection software of the ZEISS Quality Suite. Got any questions on 3D scanning? Contact us via support@HandsOnMetrology.com

How to

How to set up a digital warehouse with 3D scanning

How to

How to set up a digital warehouse with 3D scanning

3D scanning helps to create your digital warehouse in MRO. With the digital copy you have important information at hand in the event of a sudden defect. Reduce costs due to extended downtime or storage, and easily access your digital inventory where and when you need it. Got any questions on 3D scanning? Contact us via support@HandsOnMetrology.com

How to

How to reproduce unavailable spare parts in MRO

How to

How to reproduce unavailable spare parts in MRO

Currently facing the challenge of reproducing unavailable spare parts? 3D scanning might be the solution you need to minimize risky downtime. By capturing the dimensions of the equipment, a reproduction is possible in no time. Watch the How to to learn more about it. Got any questions on 3D scanning? Contact us via support@HandsOnMetrology.com

How to

How to 3D scanning for wear control in MRO

How to

How to 3D scanning for wear control in MRO

Got any questions on 3D scanning? Contact us via support@HandsOnMetrology.com

How to

How to weld check on electric motorcycle frames

How to

How to weld check on electric motorcycle frames

The basic structure of a motorcycle is the welded frame. Weld inspection is therefore necessary not only to maintain quality of parts, but also for customer safety. With the ZEISS T-SCAN hawk 2 and the weld inspection package of the ZEISS Quality Suite, you can easily scan, classify and inspect welds. Let Juan show you how it’s done.
Got any questions on 3D scanning? Contact us via support@HandsOnMetrology.com

How to

How does satellite mode work and why do you need it

How to

How does satellite mode work and why do you need it

zeiss-t-scan-hawk-2-3d-laser-scanner-dent-detection-aerospace

How to

How to use a 3D scanner for dent detection

How to

How to use a 3D scanner for dent detection

Looking for a way to speed up and refine your aircraft MRO? Let Roel show you how the ZEISS T-SCAN hawk 2 and the Inspect Software aid in various inspection tasks, like GD&T, CAD comparisons or defect maps. Got any questions on 3D scanning? Contact us via support@HandsOnMetrology.com

How to

How to measure in production

How to

How to measure in production

Small and portable: the ZEISS T-SCAN hawk 2 is made for the use in production. See here how it supports your complete process chain from data collection for reverse engineering, different inspection tasks to the digital assembly of produced parts.
Do you want to find out more about the portable 3D laser scanner T-SCAN hawk 2? Visit HandsOnMetrology.com/sessions

How to

How to scan large objects using a portable 3D scanner

How to

How to scan large objects using a portable 3D scanner

Learn how to measure big parts, like sand molds. Roel is using the new Satellite Mode of the ZEISS T-SCAN hawk 2 – replacing the built-in photogrammtry of the previous scanner generation. Together with scale bars, reference points and the big field of view of the handheld sensor, it is a powerful combination which ensures highly accurate data.

How to

How to use a 3D scanner in confined spaces

How to

How to use a 3D scanner in confined spaces

1/12

Getting Started – Basics

ATOS Q: Zu einem kleinen Messvolumen wechseln

Getting Started – Basics

ATOS Q: Zu einem kleinen Messvolumen wechseln

Um eine hohe Auflösung bei kleinen, detailreichen Objekten zu erzielen, kannst du beim ATOS Q einfach das Messvolumen ändern. Dokus zeigt schrittweise, wie man die Linsen vorbereitet und wechselt, das Messvolumen in GOM Inspect festlegt und den Sensor kalibriert.

Getting Started – Basics

ATOS Q: Start a project in ZEISS INSPECT

Getting Started – Basics

ATOS Q: Start a project in ZEISS INSPECT

Let Dokus show you how to make your first scan with ZEISS INSPECT. He takes you from the start screen to the checkered flag: a very detailed mesh. See different workspaces and scanning templates. Learn how to scan and watch what happens when you rotate the table.

All functions shown are available in the current software version.

Got any questions on 3D scanning? Contact us via support@HandsOnMetrology.com

Chapters
00:42 Start software
01:03 Workspaces
01:33 Digitizing workspace
01:58 Main toolbar
02:22 First scan and cut out background
02:50 Reference points
03:18 Polygonize and recalculate

Getting Started – Basics

ATOS Q: Unboxing your new 3D scanner

Getting Started – Basics

ATOS Q: Unboxing your new 3D scanner

Meet Dokus and the ATOS Q with its two cases. The first case contains the ATOS Q sensor and everything you might need on location, from rotation table to measuring volumes or the calibration plate. The second, smaller case contains the laptop and the mobile controller.

Chapters
00:27 The case
00:50 First compartment level
01:05 Second compartment level
01:26 Bottom compartment level
01:34 Mobile controller
01:52 The laptop

Getting Started – Basics

ATOS Q: Das Einrichten des Systems

Getting Started – Basics

ATOS Q: Das Einrichten des Systems

Hier richtet Dokus den ATOS Q Scanner ein und schließt den Sensor am Laptop an. Er führt dich schrittweise durch das Öffnen der mobilen Steuerung und Befestigen des Sensors am Stativ bis zum Einstecken des Lizenzschlüssels und Anschluss des automatischen Drehtischs.

1/4

Getting Started – Next Steps

ATOS Q: How to measure big parts

Getting Started – Next Steps

ATOS Q: How to measure big parts

Use the 3D scanner ATOS Q to scan a large part with the measuring volume MV500. Even if the object is bigger than the measuring volume, you can capture it easily using reference points and stitching scans to get a high quality result including small details.

Chapter:
00:42 Start new project and perform first scan
01:24 Stitching scans with reference points
02:01 Finish scan

Getting Started – Next Steps

ATOS Q: How to measure top and bottom of a part

Getting Started – Next Steps

ATOS Q: How to measure top and bottom of a part

In this video, Dokus measures a part from the top and the bottom side to create a digital twin. A fast and easy workflow with the 3D scanner ATOS Q, assisted by the automatic rotation table and GOM Inspect. After measuring, simply combine and polygonize the data.

Chapters
00:38 Start new project
00:54 Use rotation table
01:38 Flip over the part
01:55 New measurement series
02:42 Combine top and bottom
03:23 Polygonize and recalculate

Getting Started – Next Steps

ATOS Q: Measure with the automatic rotation table

Getting Started – Next Steps

ATOS Q: Measure with the automatic rotation table

Learn how to use the automatic rotation table to speed up the 3D scanning workflow with ATOS Q. GOM Inspect allows you to choose the number of automatic rotations. A rule of thumb: With 8 rotations you capture almost every aspect of the part.

Chapters
00:45 Rotate rotation table
01:14 Select scanning template and perform first scan
01:41 Use rotation table
02:20 Polygonize and recalculate

Getting Started – Next Steps

ATOS Q: Add single points with a touch probe

Getting Started – Next Steps

ATOS Q: Add single points with a touch probe

Learn how to use a touch probe to capture 3D data. Dokus shows you how to scan in difficult-to-reach areas and explains guided touch probe measurements in GOM Inspect Suite.

Chapters
00:27 The touch probe
00:49 Live workspace
01:16 Select touch probe
01:44 Finish measurement
02:00 Guided touch probe measurements
02:42 Start guided touch probe measurements

Getting Started – Next Steps

ATOS Q: Tips & tricks to scan even faster

Getting Started – Next Steps

ATOS Q: Tips & tricks to scan even faster

Dokus gives valuable tips on using the 3D scanner ATOS Q. Learn how to measure the automatic exposure time and move the focus point, how to change into fast scan mode – if you don’t need details – or how to manually cut out points.

Chapters
00:42 Automatic exposure time
00:59 Move the focus point
01:36 Fast scanning
02:22 Cut out points
02:52 Selection tools

Getting Started – Next Steps

ATOS Q: Fast inspection with GOM Inspect

Getting Started – Next Steps

ATOS Q: Fast inspection with GOM Inspect

GOM Inspect erlaubt dir eine schnelle Inspektion. Bereite dafür dein Projekt in der Inspektionsumgebung vor, inkl. Vorausrichtung einer CAD-Datei und Oberflächenvergleich. Nach dem ersten Scan kannst du sofort die Ergebnisse ansehen. Kapitel 00:29 Prepare the project 00:53 Inspection workspace 01:32 Prealignment 01:44 Surface comparison 02:04 Digitizing workspace 02:30 Automated recalculation through parametrics

1/6

How to

How to save time with ZEISS INSPECT

How to

How to save time with ZEISS INSPECT

Let Matt show how quality control becomes more efficient using the full version of ZEISS INSPECT. Whether inspecting one or multiple parts, templates transfer pre-made inspection steps in one click. Trend project function furthermore helps when all parts need to be checked at once – making evaluation fast, easy and intuitive.
All functions shown are available in the current software version.

Got any questions on 3D scanning? Contact us via support@HandsOnMetrology.com

warpage-of-plastic-parts_game-controller

How to

How to eliminate plastic warpage in Quality Control

How to

How to eliminate plastic warpage in Quality Control

Annoyed about plastic warpage and how it makes quality control of unassembled parts difficult? In this video, Toon shows you how to solve this problem: with the De-warp function that can be found in the full version of ZEISS INSPECT . It puts scanned plastic parts into a virtually assembled state, allowing you to check their dimensions as if they were assembled.
All functions shown are available in the current software version.

Got any questions on 3D scanning? Contact us via support@HandsOnMetrology.com

gom_atos-q_3d-inspection_digital-assembly-in-gom-inspect

How to

So funktioniert der digitale Zusammenbau in ZEISS INSPECT

How to

So funktioniert der digitale Zusammenbau in ZEISS INSPECT

In diesem Video zeigt Toon, wie er das Feature "Digitaler Zusammenbau" in ZEISS INSPECT für die virtuelle Ausrichtung mehrerer Teile eines Motorblocks und deren Prüfung auf Materialdickefehler nutzt. Nach dem Scannen kann der digitaler Zusammenbau analysiert werden.

How to

Wie man Objekte ohne Referenzpunkte scannt

How to

Wie man Objekte ohne Referenzpunkte scannt

How to

Schnellere 3D-Scans mit einem automatischen Drehtisch

How to

Schnellere 3D-Scans mit einem automatischen Drehtisch

Entdecke, wie Norman beim Scannen kleiner oder mittlerer Objekte Zeit spart: Sie auf einen automatischen Drehtisch zu stellen ist der erste Schritt zu einem schnelleren Scanablauf. Das Ergebnis: mehr Vorbereitungszeit für den nächsten Scan – oder Kaffeepausen.

How to

How to get even more out of your ATOS Q

How to

How to get even more out of your ATOS Q

Let Dokus show your the benefits of upgrading your ATOS Q with ZEISS INSPECT – Pro Line: The software offers a wide range of extra features for analysis and inspection and improved functionality. Three of the powerful add-ons are:
1) the use of a touch probe with your system to combine scanning and probing.
2) the use of your system as a live tracking device.
3) the use of your system as a projector – to project elements directly onto the part.

zeiss-tscan-hawk_3d-inspection_3d-scanner-in-production

How to

Wie man 3D-Scans für den Bau von Rallyewagen nutzt

How to

Wie man 3D-Scans für den Bau von Rallyewagen nutzt

In diesem Video zeigt Toon, wie die Scanner ATOS Q und ZEISS T-SCAN hawk beim Umbau eines Straßenwagens in ein Rallyeauto helfen. Nach der Demontage des Autos liefern 3D-Daten eine vollständige digitale Kopie für das Reverse Engineering.

1/7

Getting Started – Basics

METROTOM 1: The Setup

Getting Started – Basics

METROTOM 1: The Setup

The 3D scanner ZEISS METROTOM 1 is powered by CT technology and allows you to inspect internal structures that can’t be detected with tactile or optical measuring systems. Sounds interesting? In this Getting Started video Aysel and John will teach you how to set up the hardware. Find out how to power up. Discover the scanner’s control hardware with all its switches, buttons and functions. Then learn how to connect the solution to the software ZEISS INSPECT and warm up the X-ray tube.

Have you got any questions on 3D scanning?
Contact us via support@HandsOnMetrology.com

Getting Started – Basics

METROTOM 1: Easy part fixture

Getting Started – Basics

METROTOM 1: Easy part fixture

So you got yourself the 3D scanner ZEISS METROTOM 1 – powered by CT technology – and want to learn how to fix a part so it won’t move during the scan? In this Getting Started video Aysel and John will show you a few quick and cost-efficient tricks for creating the perfect part fixture. Watch the two 3D experts as they get crafty with insulation foam and hot glue before placing their part on the fixture plate and locking it into the rotation table inside the system.

Have you got any questions on 3D scanning?
Contact us via support@HandsOnMetrology.com

Getting Started – Basics

METROTOM 1: Introduction to ZEISS INSPECT

Getting Started – Basics

METROTOM 1: Introduction to ZEISS INSPECT

ZEISS METROTOM 1 – powered by CT technology – is yet another 3D scanning solution that fully reaches its outstanding potential once connected to the software ZEISS INSPECT. Follow Aysel and John, as they take you into ZEISS INSPECT via the ZEISS Quality Suite, and get a quick tour around the four different workspaces, dedicated to scanning, inspecting, reporting and mesh editing.

Have you got any questions on 3D scanning?
Contact us via support@HandsOnMetrology.com

Getting Started – Basics

METROTOM 1: Quick & easy calibration

Getting Started – Basics

METROTOM 1: Quick & easy calibration

In this video, Aysel and John will show you how to calibrate the 3D scanner ZEISS METROTOM 1. The solution comes with a calibration object and fixture device so you can recalibrate at any time. Good news: The software ZEISS INSPECT guides you through the process. After that, your METROTOM 1 is ready for 100 % accurate 3D scanning.

Have you got any questions on 3D scanning?
Contact us via support@HandsOnMetrology.com

1/4

Getting Started – Next Steps

METROTOM 1: Scanning single parts

Getting Started – Next Steps

METROTOM 1: Scanning single parts

You want start your first 3D scan with ZEISS METROTOM 1 so you can inspect the internal structures of a part via CT technology? Then watch Aysel and John’s Getting Started video first: Their step-by-step tutorial takes you through the basic scanning strategy of scanning a single, transparent plastic part. You’ll learn about all the adjustments to be made on the METROTOM 1 before the scan – including the adjustment of the filter wheel and the x-ray tube parameters voltage, power and exposure time. Just follow them along – it’s easy.

Have you got any questions on 3D scanning?
Contact us via support@HandsOnMetrology.com

Getting Started – Next Steps

METROTOM 1: Scanning multiple parts

Getting Started – Next Steps

METROTOM 1: Scanning multiple parts

The 3D scanner ZEISS METROTOM 1 – powered by CT technology – is perfect for scanning multiple parts at once, as it seriously reduces scan times. Interested? Then watch Aysel and John’s tutorial. Learn how to prepare the parts for 3D scanning, discover how to set up the software – and experience its simple, built-in separation tool: for separating out the batch volume into smaller volumes for each individual part.

Have you got any questions on 3D scanning?
Contact us via support@HandsOnMetrology.com

Getting Started – Next Steps

METROTOM 1: Easy volume visualization

Getting Started – Next Steps

METROTOM 1: Easy volume visualization

When combined with the software ZEISS INSPECT, the 3D scanner ZEISS METROTOM 1 offers incredible advantages for the inspection of internal defects – and John and Aysel know all the visualization tricks. Follow their tutorial to learn about slicing through a part in order to look inside. Scroll through parts with the clever picture-in-picture view. Choose the multi-view function for a view of all three directions. And get several insights at a single glance by making the mesh and CAD visible, too.

Have you got any questions on 3D scanning?
Contact us via support@HandsOnMetrology.com

Getting Started – Next Steps

METROTOM 1: Easy internal defect inspection

Getting Started – Next Steps

METROTOM 1: Easy internal defect inspection

You’re looking for a solution to help you locate and classify internal part defects? Then ZEISS METROTOM 1 – powered by CT technology – is the perfect solution and this video teaches you how it’s done. Learn how to do automated, high-quantity internal inspections on the digital twin of any part. Take a look at all aspects of a defect – from porosity percentage or defect volume to defect length or defect distance to the surface of the part.

Have you got any questions on 3D scanning?
Contact us via support@HandsOnMetrology.com

Getting Started – Next Steps

METROTOM 1: Automated parameter selection

Getting Started – Next Steps

METROTOM 1: Automated parameter selection

What makes the use of your 3D scanner ZEISS METROTOM 1 even more convenient? Automated parameter selection: a standard function in ZEISS INSPECT. Sounds interesting? In this video you’ll learn how to let the solution calculate suitable parameter settings for you – based on part shape, thickness, density and desired scan resolution. Time for you to sit back and wait for the magic to happen.

Have you got any questions on 3D scanning?
Contact us via support@HandsOnMetrology.com

Getting Started – Next Steps

METROTOM 1: Part inspection with CAD data

Getting Started – Next Steps

METROTOM 1: Part inspection with CAD data

In this Getting Started Aysel and John will show you how to inspect a 3D scan of your METROTOM 1 using not only scan data but CAD data, too. Find out about the benefits of 3D inspection with CAD data. Discover how to join and align a scan mesh with a CAD file. Learn about the software’s surface comparison, distance inspection and GD&T analysis function. The cherry on top: all inspections are documented in the report workspace – making reporting extra easy.

Have you got any questions on 3D scanning?
Contact us via support@HandsOnMetrology.com

1/6

Hol dir die Software, starte
dein Projekt.

Jetzt downloaden

Software

ZEISS REVERSE ENGINEERING

Getting Started – Basics

ZEISS REVERSE ENGINEERING: Software user interface

Getting Started – Basics

ZEISS REVERSE ENGINEERING: Software user interface

In this video, Josh provides a quick overview of the ZEISS REVERSE ENGINEERING software user interface and shows you how to set up and start using the software. He covers the basics, including the software settings, the workspaces and some additional functionalities. Watch it and get started!

All functions shown are available in the current software version.

Got any questions on the ZEISS software? Contact us via support@HandsOnMetrology.com

Getting Started – Basics

ZEISS REVERSE ENGINEERING: Most common functions

Getting Started – Basics

ZEISS REVERSE ENGINEERING: Most common functions

Discover the most common functions of ZEISS REVERSE ENGINEERING. In first place: the „extract surfaces from parts“ function, which leads directly to the „extract solid body“ function – two powerful tools, especially for geometry-based parts. Second place: the creation of symmetric parts. Third place: the creation of freeform surfaces. And last but not least: the analysis function of your parts. Let Josh show you what’s what.

All functions shown are available in the current software version.

Got any questions on the ZEISS software? Contact us via support@HandsOnMetrology.com

1/2

Getting Started – Next Steps

ZEISS REVERSE ENGINEERING: Importing data

Getting Started – Next Steps

ZEISS REVERSE ENGINEERING: Importing data

Take it from Josh: Importing data into ZEISS REVERSE ENGINEERING is just as easy as importing it into ZEISS INSPECT. If ou’re already using ZEISS INSPECT, simply export into ZEISS REVERSE ENGINEERING. Alternatively, you can drag and drop files from your file explorer or use the import option as the top of ZEISS REVERSE ENGINEERING. Want to know which file types are supported? Simply take a look at the user guide.

All functions shown are available in the current software version.

Got any questions on the ZEISS software? Contact us via support@HandsOnMetrology.com

Getting Started – Next Steps

ZEISS REVERSE ENGINEERING: Edit and align meshes

Getting Started – Next Steps

ZEISS REVERSE ENGINEERING: Edit and align meshes

Let Josh show you how to align and edit your mesh in ZEISS REVERSE ENGINEERING. Step 1: Align your mesh with the „best fit via three planes“ function to review your part in an intuitive manner. Step 2: Edit your mesh by closing small holes with the „fill holes in mesh automatically“ function. Now you have a fully closed and aligned mesh without any unwanted data – and you’re ready to start the reverse engineering process.

All functions shown are available in the current software version.

Got any questions on the ZEISS software? Contact us via support@HandsOnMetrology.com

Getting Started – Next Steps

ZEISS REVERSE ENGINEERING: Tips and tricks

Getting Started – Next Steps

ZEISS REVERSE ENGINEERING: Tips and tricks

Got any questions on the ZEISS software? Contact us via support@HandsOnMetrology.com

1/3

How to

New Sketching function in ZEISS REVERSE ENGINEERING

How to

New Sketching function in ZEISS REVERSE ENGINEERING

Looking for an easy way to get more control over your reverse engineered models? With the new sketching function in ZEISS REVERSE ENGINEERING, creating CAD models is easier than ever. Your benefit: fully dimensioned and constrained CAD from scan data.

Do you have any questions about ZEISS REVERSE ENGINEERING? Contact us via support@HandsOnMetrology.com

How to

ZEISS REVERSE ENGINEERING: How to create a CAD file out of manually modelled parts

How to

ZEISS REVERSE ENGINEERING: How to create a CAD file out of manually modelled parts

Looking for an easy way to create a CAD out of your individually modelled part? Let Matt show you how! With the help of the ATOS Q and the ZEISS REVERSE ENGINEERING software the part gets digitized and undergoes step by step virtual modeling. Helpful features support the process to enable fast and intuitive work.

All functions shown are available in the current software version.

Got any questions on 3D scanning? Contact us via support@HandsOnMetrology.com

zeiss-reverse-engineering_software_transform-3d-scan-into-cad

How to

ZEISS REVERSE ENGINEERING: How to transform your 3D scans into CAD models

How to

ZEISS REVERSE ENGINEERING: How to transform your 3D scans into CAD models

Meet Josh and let him show you how to transform your 3D scans into CAD models using the software ZEISS REVERSE ENGINEERING. Wether you want to reverse engineer a geometrical part, a freeform shaped part or an organic shaped part – Josh gives you a quick introduction to each task, from scanning to obtaining a CAD model.
All functions shown are available in the current software version.

Got any questions on 3D scanning? Contact us via support@HandsOnMetrology.com

1/3

User interface in ZEISS INSPECT software

Getting Started – Basics

ZEISS INSPECT: Optical 3D User Interface

Getting Started – Basics

ZEISS INSPECT: Optical 3D User Interface

Find out how to perform accurate 3D data evaluation in ZEISS INSPECT. Whether you are facing simple or more complex inspection tasks, the software has it all: mesh editing functions, CAD import, GD&T inspections, trend analysis and digital assembly.

Do you have any questions about ZEISS INSPECT?
Contact us via email: support@HandsOnMetrology.com

Getting Started – Basics

ZEISS INSPECT: Data import

Getting Started – Basics

ZEISS INSPECT: Data import

Starting your 3D inspection is easy with ZEISS INSPECT. Learn which formats are supported in our software and how easy it is for you to import your 3D data.

Do you have any questions about ZEISS INSPECT?
Contact us via email: support@HandsOnMetrology.com

Getting Started – Basics

ZEISS INSPECT: Performing single inspection

Getting Started – Basics

ZEISS INSPECT: Performing single inspection

Learn how to compare your 3D data to the CAD in ZEISS INSPECT. The software solution offers you a wide range of inspection possibilities, like the color plot, deviation labels for discrete deviation labels or the clipping functionalities for small or hard to reach areas.

Do you have any questions about ZEISS INSPECT?
Contact us via email: support@HandsOnMetrology.com

Getting Started – Basics

ZEISS INSPECT: Performing GD&T inspections

Getting Started – Basics

ZEISS INSPECT: Performing GD&T inspections

Do you have any questions about ZEISS INSPECT?
Contact us via email: support@HandsOnMetrology.com

Getting Started – Basics

ZEISS INSPECT: Reporting

Getting Started – Basics

ZEISS INSPECT: Reporting

Need tips on how to create, edit and present your 3D inspection reports? The ZEISS INSPECT report workspace got you covered. Learn here how to use the workspace to receive comprehensive and customizable reports pages.

Do you have any questions about ZEISS INSPECT?
Contact us via email: support@HandsOnMetrology.com

1/5

How to

How to perform CAD surfacing in ZEISS INSPECT

How to

How to perform CAD surfacing in ZEISS INSPECT

No CAD available for projects like 3D printing? The new surfacing function in ZEISS INSPECT got you covered. With a simple mouse click you receive a customizable CAD based on our 3D scan data. Let Luca show you how to simplify the creation of CAD with the latest release ouf our software solution.

Do you have any questions about ZEISS INSPECT? Contact us via support@HandsOnMetrology.com

How to

How to deliver first class report presentations

How to

How to deliver first class report presentations

Let Norman show you how to deliver impressive presentations with ZEISS INSPECT. Simply export your measurements to a PDF? It’s an option, but a static one. You can do better! Simply open ZEISS INSPECT in the meeting room, hit the F5 key for the presentation mode – and get the option to zoom in or rotate the part and adjust the display. You can even show your mesaurement results on the object – with the help of a tablet and AR. Now, that’s impressive.
All functions shown are available in the current software version.

Got any questions on 3D scanning? Contact us via support@HandsOnMetrology.com

1/2

Möchtest du noch mehr wissen?

Nehmen Sie Kontakt mit Ihrem lokalen #HandsOnMetrology-Partner auf.

Partner finden

Archäologie trifft 3D Scan-Technologie

Neueste Videos

Beliebteste Videos

Maker Portraits

One-Minute Insights

Wie man große Objekte mit einem tragbaren 3D-Scanner scannt

GOM Scan 1

T-SCAN hawk 2

ATOS Q

METROTOM 1

Hol dir die Software, starte
dein Projekt.

Software

ZEISS REVERSE ENGINEERING

ZEISS INSPECT

Möchtest du noch mehr wissen?

Entdecke unsere neuesten Videos

Videos

Lösungen

Digitale Events

Mehr

Follow us

Trag dich in unseren Newsletter ein

Follow us

Videos

Lösungen

Digitale Events

Mehr

Trag dich in unseren Newsletter ein